100 Custom Handmade Jump Rings Orange 16, 18, 20, 22 or 24 gauge - Your Choice of Size, Saw Cut and Easy to Close - 100% Guarantee
These handmade Orange 18, 20 or 22 gauge jump rings are perfect for chainmaille artisans and all jewelry artisans who are looking for something better than what is available commercially!
These rings are a wonderful weight because the base metal is copper. First the rings are silver plated and then the Orange Color is applied. Then they have a clear coating baked on to prevent tarnishing and increase durability! They are handmade by me to my exacting specifications for my personal use and you will love how my attention to detail will make your creations stand out! I recommend them for light to medium duty creations.
24 gauge = 0.51mm
22 gauge = 0.6mm
20 gauge = 0.8mm
18 gauge = 1mm
16 gauge = 1.29mm
24 gauge 1.5mm ID (Inside Diameter)
22 gauge 1.5mm ID
22 gauge 2.4mm ID
22 gauge 3mm ID
20 gauge 1.5mm ID
20 gauge 3mm ID
20 gauge 4mm ID
20 gauge 5mm ID
20 gauge 6mm ID
20 gauge 10mm ID
18 gauge 1.5mm ID
18 gauge 3mm ID
18 gauge 3.75mm ID
18 gauge 4mm ID
18 gauge 5mm ID
18 gauge 5.5mm ID
18 gauge 6mm ID
18 gauge 7mm ID
18 gauge 8mm ID
18 gauge 9mm iD
18 gauge 10mm ID
18 gauge 11mm ID
18 gauge 12mm ID
18 gauge 13mm ID
18 gauge 15mm ID
16 gauge 3.75mm iD
16 gauge 4.5mm ID
16 gauge 6.5mm ID
16 gauge 9mm ID
16 gauge 18mm ID
Size Mix (a variety of gauges and sizes)
~~ 18 gauge 3mm ID is ideal for small linking rings and to weave Jens Pind chains.
~~ 18 gauge 3.75mm ID is a perfect size for Byzantine, Barrel Weave, 2-into-2 chainmaille weaves and is also a good size to connect charms and small pendants.
~~ 18 gauge 4mm ID is great for more open versions of 2-into-2, European 4-in-1, and mobius flowers.
~~ 18 gauge 7mm ID works with 18 gauge 3.75mm ID to make Linked Loops and Helm Chain
~~ 18 gauge 8mm ID makes wonderful Eternity Earrings
~~ 20 gauge 3mm ID is a great size to hold small drops and charm
~~ 20 gauge 4mm ID makes an open European 4-in-1
~~22 gauge 3mm ID is perfect for holding my shaggy beads
They are made from Non-tarnishing Silvered Orange Wire. They are wound on a mandrel and saw cut with 0.008" rotary slitting saw blade-this means that only a very small amount of the ring is removed which gives you a nice round ring with a very smooth parallel cut and NO BURRS.
Next they are tumble washed with detergent and hot water and dried at low temperature; each are hand inspected. Special tools are not required to work with these! I damage 1% on average when making chainmaille.
I love making chainmaile, but was unable to purchase jump rings that met my standards, so I invested in the equipment and started making them myself. Over 40 years engineering experience paid off! I love them! The weight is substantial and my customers love the feel when they pick up my products.
everything was perfect! Very well made and as described. Highly recommended