100 Jump Rings - Non Tarnish Bronze - Custom Handmade 16,18, 20, 22, and 24 gauge in Your Choice of Diameter - 100% Guarantee

SKU: QokSf32
These custom hand made Non-tarnishing Bronze jump rings are perfect for chainmaille artisans and all jewelry artisans who are looking for something better! They come in your pick of 16, 18, 20, 22, or 24 Gauge in your choice of Diamter.

This listing is for 100 non-tarnishing bronze in 16,18, 20, 22, or 24 gauge jump rings in your choice of diameter.

24 gauge = 0.51mm
22 gauge = 0.6mm
20 gauge = 0.8mm
18 gauge = 1mm
16 gauge = 1.29mm

3mm ID = 5mm OD
3.75mm ID = 5.75mm OD
4mm ID = 6mm OD

24 gauge 1.5mm ID (Inside Diameter)
22 gauge 1.5mm ID
22 gauge 2.4mm ID
22 gauge 3mm ID
20 gauge 1.5mm ID
20 gauge 3mm ID
20 gauge 4mm ID
18 gauge 1.5mm ID
18 gauge 3mm ID
18 gauge 3.75mm ID
18 gauge 4mm ID
18 gauge 5mm ID
18 gauge 6mm ID
18 gauge 7mm ID
18 gauge 8mm ID
18 gauge 15mm ID
16 gauge 3.75mm ID
16 gauge 4.5mm ID
16 gauge 6.5mm ID
16 gauge 9mm ID
16 gauge 18mm ID
Size Mix - A Variety of Gauges and Diameters

~~ 18 gauge 3mm ID is ideal for small linking rings and to weave Jens Pind chains.
~~ 18 gauge 3.75mm ID is a perfect size for Byzantine, Barrel Weave, 2-into-2 chainmaille weaves and is also a good size to connect charms and small pendants.
~~ 18 gauge 4mm ID is great for more open versions of 2-into-2, European 4-in-1, and mobius flowers.
~~ 18 gauge 7mm ID works with 18 gauge 3.75mm ID to make Linked Loops and Helm Chain
~~ 18 gauge 8mm ID makes wonderful Eternity Earrings
~~ 20 gauge 3mm ID is a great size to hold small drops and charm
~~ 20 gauge 4mm ID makes an open European 4-in-1
~~22 gauge 3mm ID is perfect for holding my shaggy beads

These rings are a wonderful rich bronze color because the copper base wire is first coated in bronze and then they have a clear coating applied to prevent tarnishing and increase durability! They are handmade by me to my exacting specifications-and I am now making them for sale!

They are made from Non-tarnishing Bronze Enameled Copper Wire. They are wound on a mandrel and saw cut with 0.008" rotary slitting saw blade-this means that only a very small amount of the ring is removed which gives you a nice round ring with a very smooth parallel cut.

Next they are tumble washed with detergent and hot water and dried at low temperature; each are hand inspected. Special tools are not required to work with these! I damage 1% on average.

I love making chainmaile, but was unable to purchase jump rings that met my standards, so I invested in the equipment and started making them myself. Over 40 years engineering experience paid off! I love them! The weight is substantial and my customers love the feel when they pick up my products.

►Check my joints! The picture shows why you will be able to close this ring so that it appears nearly seamless!

Prefer another finish, style or size of jump ring.  Look here
Look here to see my other Non-Tarnishing Bronze listings

QUESTIONS? Contact me and I will get right back to you with answers.