Firescoff and Solder for Copper/Bronze, Brass or Precious Metals- Replace Flux, Firecoat, Pickle- Flawless Welds & Near Perfect Color Match

$18.50
SKU: T-FaSfCBBoPM

This listing is for a Soldering Kit especially for copper, bronze, brass, sterling silver or 14kt gold filled! These are the products that we use to make our nearly perfect soldered closed jump rings! Select JUST the Firescoff or a complete kit!

In the KIT, you will receive:

► 1 ounce or 4 ounces of Firescoff Ceramic Flux Spray
This replaces Flux, Firecoat and Pickle and is the industry leading firescale protection! With practice, you will be able to produce flawless void-free welds! You will save 60% in prep time and will be able to preform multiple soldering's with a single application. It helps to maintain the original metal color, is non toxic and cleans up with warm water! It sounds too good to be true, but this is truly the BEST stuff!

►Convenient Flip Top Bottle to help make your Firescoff go further. We have found it wasteful to spray the Firescoff so we pour a little into this bottle and work from there. It seals shut for your next project. This is a little thing, but it makes a big difference!

►Complete written step-by-step instructions with pictures and MSDS.

YOUR CHOICE:

►JUST 1 oz Firescoff with complete written step-by-step instructions with pictures and MSDS.

► 1 oz Firescoff PLUS 1 foot of "easy" copper solder. This is what we use to make nearly seamless joints when we solder our COPPER and BRONZE jump rings. With a little practice, you will have trouble finding your joints too! This will blend almost perfectly with COPPER and BRONZE creations so you don't have a silver joint...and it will be a strong joint! This is milled in the USA, and does not contain lead. The melting flow point is 1,350 degrees Fahrenheit (733 Celsius) . You need a torch to use this solder, a soldering iron is NOT hot enough. Complete written step-by-step instructions with pictures and MSDS.

►1 oz Firescoff PLUS 1 square inch of brass solder. This is what we use to make nearly seamless joints when we solder our brass jump rings! Flow temperature: 1140°–1500°F (616°–816°C). This is cadmium-free and Made in the USA. You just cut a teeny bit for each joint, so a little goes a long ways! Complete written step-by-step instructions with pictures and MSDS.

►Yellow Solder chips: This is what we use to solder 14kt gold filled and even brass. These yellow silver chips that are just the right size for small soldering jobs like jump rings, clasps and earring posts! Your Choice (here are the temperatures from a torch - not an iron:
HARD - 20% Silver: Melt Temperature: 1,350°F (732°C)
Flow temperature: 1,500ºF (816°C)
You will receive 1/8 ounce. These chips are Made in the USA and do not contain nickel or lead.

►Silver Solder Chips: This is what we use to solder sterling silver, silver filled and nickel silver. These silver chips that are just the right size for small soldering jobs like jump rings, clasps and earring posts!
Your Choice (here are the temperatures from a torch - not an iron:
EASY - 65% Silver: Melt Temperature: 1240ºF (671°C)
Flow temperature: 1325ºF (718°C)
MEDIUM - 70% Silver: Melt Temperature: 1,275ºF (691°C)
Flow temperature: 1,360ºF (738°C)
HARD - 75% Silver: Melt Temperature: 1,365ºF (741°C)
Flow temperature: 1,450ºF (788°C)
You will receive 1/8 ounce. These chips are Made in the USA and do not contain nickel or lead.

You will need to provide: torch, solder pick, charcoal block

Questions? Contact us, we are happy to help!

Materials: firescoff, written instructions, msds, flip top container, brass or copper or precious metal solder.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)