These Custom Handmade Black Enameled Copper jump rings are perfect for chainmaille artisans and all jewelry artisans who are looking for something better than what is available commercially!
These rings are a wonderful weight because the base metal is copper. The glossy Black color is applied and then a clear coating baked on to prevent tarnishing! They are handmade by us to our exacting specifications for our personal use and you will love how our attention to detail will make your creations stand out! We recommend them for light to medium duty creations.
Ech listng is for 100 rings or buy 300 rings and Save!
24 gauge = 0.51mm
22 gauge = 0.6mm
20 gauge = 0.8mm
18 gauge = 1mm
16 gauge = 1.29mm
14 gauge - 1.63mm
12 gauge - 2.05mm
10 gauge - 2.59mm
YOU PICK:
24 gauge 1.5mm ID (Inside Diameter)
22 gauge 1.5mm ID
22 gauge 2.4mm ID
22 gauge 3mm ID
20 gauge 1.5mm ID
20 gauge 3mm ID
20 gauge 4mm ID
20 gauge 5mm ID
20 gauge 6mm ID
20 gauge 10mm ID
18 gauge 1.5mm ID
18 gauge 3mm ID
18 gauge 3.75mm ID
18 gauge 4mm ID
18 gauge 5mm ID
18 gauge 5.5mm ID
18 gauge 6mm ID
18 gauge 7mm ID
18 gauge 8mm ID
18 gauge 9mm ID
18 gauge 10mm ID
18 gauge 11mm ID
18 gauge 12mm ID
18 gauge 13mm ID
18 gauge 15mm ID
16 gauge 3.75mm ID
16 gauge 4.5mm ID
16 gauge 6.5mm ID
16 gauge 9mm ID
16 gauge 18mm ID
14 gauge 4.5mm ID
12 gauge 4.5mm ID
10 gauge 10mm ID
Small Size Mix - A Variety of Gauges (18, 20, 22, 24) and Diameters
Large Size Mix - A Variety of Gauges (10, 12, 14, 16) and Diameters
~~ 18 gauge 3mm ID is ideal for small linking rings and to weave Jens Pind chains.
~~ 18 gauge 3.75mm ID is a perfect size for Byzantine, Barrel Weave, 2-into-2 chainmaille weaves and is also a good size to connect charms and small pendants.
~~ 18 gauge 4mm ID is great for more open versions of 2-into-2, European 4-in-1, and mobius flowers.
~~ 18 gauge 7mm ID works with 18 gauge 3.75mm ID to make Linked Loops and Helm Chain
~~ 18 gauge 8mm ID makes wonderful Eternity Earrings
~~ 20 gauge 3mm ID is a great size to hold small drops and charms
~~ 20 gauge 4mm ID makes an open European 4-in-1
~~22 gauge 3mm ID is perfect for holding our shaggy beads
They are made from non-tarnishing lack wire. They are wound on a custom mandrel and saw cut with 0.008" rotary slitting saw blade-this means that only a very small amount of the ring is removed which gives you a nice round ring with a very smooth parallel cut.
Next they are tumble washed with detergent and hot water and dried at low temperature; each are hand inspected. Special tools are not required to work with these! We damage 1% on average.
We love making chainmaille, but were unable to purchase jump rings that met our standards, so we invested in the equipment and started making them ourselves and we love them! The weight is substantial and our customers love the feel when they pick up the products.
► We guarantee the products our customers receive will be 100% free of defects . If there is a problem, we will send a free replacement. No questions asked! We will also send along a free self-addressed stamped envelope to return the defective product.
Materials: Copper.